Cross Hairline Decorative Stainless Steel Sheet

Cross Hairline Decorative Stainless Steel Sheet

Beijing Hongsun Metal Materials Co., Ltd manufacture and sell stainless steel decorative materials approved by China Industry and Commerce Quality Inspection Bureau. It is an A-grade enterprise providing elevator metal decoration design consulting service and architectural metal decoration design.

Product Details


Product Description


The stainless steel cross pattern is also a kind of texture of the hairline, and also has a straight line, the difference is that its texture is crossed, with two directions. Very special, not as monotonous as straight line.

Image Picture



Thickness of Stainless steel line

There are many kinds of wire paths for brushed stainless steel surfaces. If you prefer a thinner wire, we can make the wire more fine according to your needs.

The thickness of this wire is controlled according to the number of molybdenum used in the wire drawing machine. If the number of molybdenum is larger, the wire is finer. If you want the wire to be thicker, the molybdenum number can be controlled to be smaller.

What is the secret to improving the stainless steel wire drawing process?

In this era of "face-to-face", people are increasingly demanding the appearance of industrial products.

In the case of stainless steel and aluminum products, in order to reflect the texture of metal materials, the surface of metal products is smooth and beautiful, many companies will carry out some special surface treatment, such as the common stainless steel wire drawing process. Brushed stainless steel is a wire drawing effect on stainless steel and aluminum products. It has become a very popular surface treatment technology.

Since it is an industrial process, it also inevitably uses a lubricant.

In the process of drawing deformation of metal, since the surface of the stainless steel is smooth and the roughness is low, lubrication is difficult and the requirements for the lubricant are also higher.

We can see that the performance of the lubricant directly determines the quality of the stainless steel and the quality of the surface finish, which is the key to the quality of stainless steel wire drawing.

So, what kind of lubricant can improve the stainless steel wire drawing process?

The wire drawing process usually has oily drawing and dry drawing, so the lubricants used are also classified into oily and dry.

In general, filaments with a final product diameter of less than 0.1 mm require one to two annealing treatments. If the steel wire is less than 0.21mm in diameter, it can be drawn with oily lubricant. The mold can be made of artificial diamond mold or natural diamond mold.

In the large diameter wire drawing, we usually use ordinary tungsten steel mold.

It is worth noting that most of the wire surface needs to be specially coated before the stainless steel is drawn. This is mainly to increase the surface roughness and improve the ability of the soap powder to carry, thereby solving the problem that the stainless steel surface is too smooth.

Compared to the conventional oxalate treatment, non-reactive coatings are currently used more, and the coated wire rods generally use calcium-based brushed powder after the first drawing.

Coupled with the storage needs in the production process, it also puts high demands on its moisture resistance, and it needs a non-reactive coating to cope well.




cross hairline decorative stainless steel sheet




0.8x120x150 (small sample)








Accept custom specification, color

Characteristics of hairline process



In order to break through the designer's restrictions on the use of decorative materials and meet more creative needs, in the new century, human beings affirm themselves and explore the unknown, develop and design gold and silver wire drawing that combines the power of knowledge and the spirit of science and technology. Finished metal plate. Such products have gold wire drawing, silver wire drawing, snow sand, sandblasting surface, which can fully reflect the heavy metal feeling that gold, silver and other hard to express in other plate types.

Gold and silver are rich colors are symbols of identity and status. The main metal materials used for gold and silver brushed metal plates can be divided into aluminum, copper and stainless steel. They are matte, mirror, three-dimensional, embossed and special with the texture, luster and characteristics of the original metal form. The veneer metal hollow surface is treated with a variety of different surfaces. According to the designer, it has a brilliant effect on different occasions.

Function of hairline porcess


The surface of the metal plate has anti-rust, anti-oxidation, anti-scratch, anti-chemical and anti-smoke characteristics. Appearance, due to the special bright surface of the product itself, in order to avoid tarnishing due to friction, it is recommended to apply to the horizontal surface with less friction, or the general vertical surface. In addition, it is recommended to use it in a dry, or not often wet, place where moisture is not too heavy to maintain product stability. Wire drawing on the metal surface can well cover the mechanical marks and mold clamping defects in production.

Package & Delivery




Stainless steel sheet: Imported 7C PVC film (Mirror finish will be two layer films

Inner of wooden box: Both upper and lower layers are covered waterproof plastic film + pretective veneer

Wooden box: Strong and seaworthy + fumigated wooden box



We support shipping, air and express delivery. According to the order, choose the best transportation method for you.

Moreover, for Russian customers, we can do land transportation, we have long-term cooperation professional to do Russian line freight forwarders, the price is excellent and lovely, to help you solve the problem of expensive shipping.

Our services & Warranty


As a professional manufacturer, we offer the following services:

1. Free small samples in stock can be provided. If you need to customize the specific pattern or style of samples, you will receive a part of the cost as a proofing fee.

2. Competitive price

3. Ship on time

4. Quality assurance

5. Free installation instructions and maintenance advice

6. Professional and feasibility project solution and recommendation

7. Our passion


Customer Show & Our team


customer show 标



1. T/T

2. Trade Assurance

3. Western Union

4. Credit Card

5. PayPal

6. L/C


Package Details





Contact Us



Hi! I'm Doris from HONGSUN!

Name: Doris Dang

Mob: +8615210360252 (Wechat & Whatsapp)


Tel: +86-010-85863731


Note: If you are interested in our stainless steel decorative sheet, please send quotation below, we will reply you within 12 hours.

SUS304, SUS316, SUS430, SUS201

Specification: width 100-1500mm  length as customer's request

Thickness: 0.5mm-6.0mm

Finish: 6k, 8k, super mirror


Product characteristic:

We imported the most advanced digital controlled polishing machine, polishing wheels and wool felts, multi-procedure polishing, strict test standard, ensuring product is flat and smooth, bright and glossy, high reflective, no bumps, deformation or marking, etc.